DEVCON
Devcon R-Flex 15565 - 1,5 Lb - 0,68kg
Devcon R-Flex 15565 - 1,5 Lb - 0,68kg
Description
Devcon® R-Flex® is formulated to quickly repair tears, holes and gouges as well as protecting clips in styrene-butadiene rubber (SBR) heavy weight conveyor belts. Offering excellent abrasion resistance as well as superior adhesion, the R-Flex® urethane compound is easy to mix and cures quickly – the repaired belt can be back in service just 90 minutes after application. Devcon® R-Flex® is perfect for rubber conveyor belt repair.
Key Features
- Rapid curing
- Superior abrasion resistance
- Exceptional flexibility
- Protect Belt Clips and Splices from Scrapers, with pulleys > 10″ diameter
- Open Time: 4 Minutes
- Fixture Time: 7-9 Minutes
- Gap Fill: 0.01″ – 0.07″
- Color: Black
Devcon Wear Guard (High Temp) 11483 - 24 Lb - 10,8kg
Devcon Wear Guard (High Temp) 11483 - 24 Lb - 10,8kg
Description
High-Temperature and high-density, ceramic bead-filled epoxy system for maximum wear and abrasion resistance in processing equipment.
Key Features
- Heat-cured, trowelable system that gives up to 30% improvement over conventional wear compounds
- Withstands continuous service temperatures to 450°F
- Unmatched resistances to many acids, bases, salts, and solvents
- Excellent abrasion resistance to all sizes of materials and particulate in high heat applications such as exhausters, pulverizers, and cyclones
Devcon Dfense Blok 11330 - 30 Lb - 13,6kg
Devcon Dfense Blok 11330 - 30 Lb - 13,6kg
Strong metal epoxy that protects processing equipment from abrasion, corrosion and impact
DFense Blok™ is a revolutionary wear and abrasion protection epoxy compound formulated to significantly outlast traditional wear and abrasion products while also providing superior performance in the most severe conditions.
DFense Blok is widely used in mines, quarries, cement and power plants to repair and protect a broad range of equipment. Operators can reduce downtime and get equipment back up and running within hours!!
DFense Blok is used to repair processing equipment including scrubbers, ash handling systems, pipe elbows, screens, chutes, chippers, bins, hoppers, bunkers, separators, digester tables. DFense Blok also protects equipment including exhausters, launderers, housing fans, crushers, breakers and conveyor screws.
Reduce repair and maintenance costs with the strongest metal epoxy compound
Key benefits include:
- 4X better abrasion resistance than competition
- 7X better drop impact strength than ceramic tile
- Superior sliding abrasion resistance
- Withstands high impact conditions
- Less prone to unexpected fractures
- Non-sag in Vertical and Overhead applications
- Open Time: 25 Minutes
- Gap Fill: .25″ – 1.5″+
- Unit Size: 30 lb
- Functional Cure: 4-5 Hours
Devcon Wear Guard Fine Load 11470 - 30 Lb - 13,6kg
Devcon Wear Guard Fine Load 11470 - 30 Lb - 13,6kg
Description
Micro-high-alumina, ceramic bead-filled, high-density epoxy system for equipment protection.
Key Features
- Handles particulate smaller than 1/8″
- Can be troweled to form a smooth surface
- Excellent for dust particulate applications, slurry pumps, scrubbers, screens, and screw conveyors
- Withstands operating temperatures as high as 300°F
- Outstanding resistance to a wide range of chemicals
- Gap Fill: .25″ – 1.5″+
Devcon Stainless Steel Putty (ST) 10270 - 1 Lb - 0,45 kg
Devcon Stainless Steel Putty (ST) 10270 - 1 Lb - 0,45 kg
Description
Stainless steel-filled epoxy putty for patching, repairing and rebuilding stainless steel food processing equipment.
Key Features
Non-rusting
Bonds to ferrous and non-ferrous metals
NSF certified for potable water applications
Acceptable for use in meat and poultry plants
Listed under NSN stock #8030-00-268-7934
Open Time: 5 Minutes
Gap Fill: 0.0625″ – .075″
Devcon Aluminium Putty (F) DV 10610 - 1Lb - 0,45kg
Devcon Aluminium Putty (F) DV 10610 - 1Lb - 0,45kg
Description
Aluminum-filled epoxy putty for dependable non-rusting repairs to aluminum castings, machinery and equipment widely used in HVAC applications.
Key Features
- Repairs air conditioning system components
- Listed under NSN Stock #8030-00-051-4511; #8030-00-670-8553
- Bonds to aluminum and many other metals
- Fills porosity in aluminum castings
- Can be machined drilled or tapped using conventional metalworking tools
- Qualifies under Mil Spec MIL-PRF-24176C, Type II
- Open Time: 60 Minutes
- Gap Fill: 0.0625″ – 0.75″
Devcon Brushable Ceramic (Blue) DV 11765 - 2Lb - 0,9kg
Devcon Brushable Ceramic (Blue) DV 11765 - 2Lb - 0,9kg
Description
Low-viscosity, alumina-filled, brushable epoxy compound, when applied to a 15-20 mil coating, provides a smooth protective barrier against wear, abrasion, corrosion, erosion, and chemical attack.
Key Features
- Temperature range up to 350°F
- 3 colors (red blue white) to insure uniform coating
- White is NSF-certified for use in potable water applications
- Low-friction surface reduces turbulence, wear, and cavitation
- Red and white formulas are acceptable for use in meat and poultry plants
- Outstanding chemical resistance to acids, solvents, and alkalis
- Open Time: 40 Minutes
- Gap Fill: .0625″ – .075″
- Color: Blue
- Cure Time: 16
Devcon Underwater Putty DV 11800 - 1Lb - 0,45kg
Devcon Underwater Putty DV 11800 - 1Lb - 0,45kg
Description
High-performance technology for repairing, patching, and rebuilding equipment in habitually wet environments, including under water.
Key Features
- Penetrates wetness to bond securely to steel, iron, aluminum, brass, bronze, concrete, wood, and some plastics
- Invaluable for use in pulp and paper mills, wastewater treatment plants, and marine environments
- Eliminates the need for substrate to be thoroughly dry before repair
- Non-rusting; easy-to-mix and apply
- Cures in temperatures as low as 40°F
- Listed under NSN Stock# 8010-01-120-8753
- Open Time: 45 Minutes
- Gap Fill: .0625″ – .075″
- Color: Grey
- Unit Size: 1lb
Devcon Ceramic Repair DV 11700 - 3Lb - 1,36kg
Devcon Ceramic Repair DV 11700 - 3Lb - 1,36kg
Description
Smooth, trowelable, alumina-filled epoxy compound for rebuilding and protecting processing equipment exposed to corrosion, erosion, cavitation, chemicals, and acids.
Key Features
- Temperature range up to 350°F
- Excellent for filling voids and rebuilding metal castings
- Qualifies under Mil Spec DOD-C-24176B(SH) Type I II
- Open Time: 25 Minutes
- Gap Fill: .0625″ – .075″
Devcon Bronze Putty DV 10260 - 1Lb - 0,45kg
Devcon Bronze Putty DV 10260 - 1Lb - 0,45kg
Description
Bronze-filled epoxy putty for repairing bronze and brass bushings, shafts, castings and equipment parts.
Key Features
- Repairs and rebuilds areas where brazing would be undesirable or impossible
- Bonds securely to bronze alloys, brass, copper, and ferrous metals
- Uses conventional metalworking tools to machine, drill, tap, or grind
- Listed under NSN stock #8030-00-333-4534
- Open Time: 35 minutes
- Gap Fill: .0625″ – .075″
- Color: Bronze
- Unit Size: 1lb
Devcon Titanium Putty 10760 1set (2pcs)
Devcon Titanium Putty 10760 1set (2pcs)
Description
High-performance, non-rusting titanium-reinforced epoxy engineered for making repairs to machinery and equipment that can be precision machined. Withstands heavy loads in hard chemical environments.
Key Features
- Excellent temperature resistance (350°F)
- High compressive strength (15,200 psi)
- Resistance to chemicals and most acids, bases, solvents, and alkalis
- Qualifies under Mil Spec MIL-PRF-24176C, Type I
- Listed under NSN stock #8030-01-335-0562
- Open Time: 21 Minutes
- Gap Fill: .0625″ – .075″
- Color: Grey
Merk : Devcon
Tipe : 10760
Jenis : Titanium Putty
Terdiri dari 2 bagian : Resin + Hardener
Fungsi : Untuk merekatkan/menempelkan/menambal dengan sangat kuat. Produk asli akan mengering menjadi seperti Titanium.
Spesifikasi bisa dilihat langsung pada gambar/foto barang atau menanyakan langsung ke kami
Devcon 10240 plastic steel 5 minutes putty (SF)
Devcon 10240 plastic steel 5 minutes putty (SF)
Description
Fast-curing, steel-filled epoxy for dependable emergency repairs in less than one hour.
Key Features
- Hardens in one hour
- Mixes, applies, and cures at temperatures as low as 40°F
- Cures to a tough, steel-filled material
- Can be machined, drilled, tapped, or sanded
- Listed under NSN stock #8030-00-229-8734
- Open Time: 5 Minutes
- Gap Fill: .0625″ – .075″
Merk : Devcon
Tipe : 10240
Jenis : PLASTIC STEEL 5 MINUTE PUTTY
Berat bersih : 454 gram
Terdiri dari 2 bagian : Resin + Hardener
Fungsi : Untuk merekatkan/menempelkan/menambal dengan sangat kuat. Produk asli akan mengering menjadi seperti Besi/Logam.
Devcon Plastic Steel Putty (A) DV 10110 (454g)
Devcon Plastic Steel Putty (A) DV 10110 (454g)
Description
Plastic Steel® is the original metal-filled epoxy putty used for hundreds of routine maintenance, production, and tooling applications. Patch and repair areas where welding or brazing would be undesirable or impossible
Key Features
- Bonds to most metals, concrete and some plastics
- Cures at room temperature and forms a tough durable metallic mass that can be drilled, tapped, machined or painted
- Excellent resistance to oil, gasoline, water and many chemicals
- Listed under NSN Stock #8030-00-903-6545; #8030-00-962-4430
- Open Time: 45 minutes
- Color: Gray
- Mix Ratio: 2.5:1
Spesifikasi Produk :
Merk : Devcon
Tipe : 10110 (A)
Jenis : Plastic Steel Putty
Terdiri dari 2 bagian : Resin + Hardener
Devcon 10110 Plastic Steel
Dempul epoksi berisi logam asli yang digunakan untuk ratusan perawatan rutin, produksi, dan aplikasi perkakas. Menambal dan memperbaiki area di mana pengelasan atau mematri tidak diinginkan atau tidak mungkin dilakukan.
Fitur Produk :
Dempul epoksi
Merekat pada sebagian besar logam, beton, dan beberapa plastik
Menyembuhkan pada suhu kamar dan membentuk massa logam tahan lama yang dapat dibor, diketuk, dikerjakan dengan mesin, atau dicat
Ketahanan yang sangat baik terhadap minyak, bensin, air dan banyak bahan kimia
